CERTIFIED WET MARINE EXHAUST HOSES
Corrugated, Hardwall, & Softwall
Meet or Exceed USCG, ABYC and SAE J2006 R2 Standards
Marine exhaust systems are constantly subjected to extreme changes in temperature, especially in wet exhaust systems where water is used to cool the hot gases from the engine. Rubber or silicone exhaust hoses are recommended due to their strength, flexibility and durability. Rubber exhaust hose is an affordable hose that offers the ability to shrink and and stretch repeatedly. At H.S. White, we offer several types of certified wet exhaust hoses in a variety of diameters and cut to length for your convenience.
MARINE EXHAUST HOSE
SERIES 200 Certified Wet Exhaust Softwall Hose – SAE J2006 R1
Certified wet exhaust, heavy-wall reinforcement with 2, 4, or 6 plies of synthetic cord. Designed for engine water circulation, heat exchanger, heavy-duty discharge lines and straight marine wet exhaust connections. Meets or exceeds USCG, ABYC, and SAE J2006 R1 Standards for wet exhaust service. Recommended for short, straight connections.
Sizes: ½” I.D. – 16” I.D.
Temperature: -20° to 200° F Continuous
Description: Black with Blue Stripe
Tube and Cover: Black Synthetic EPDM Blend Rubber
Reinforcement: Helix Wire and Plies of Synthetic Cord
Packaging: 50 Foot Coils up to 3” I.D., 12.5 Foot Lengths, Custom Cut Lengths.
SERIES 250 Certified Wet Exhaust Hardwall Hose – SAE J2006 R2
Certified wet exhaust, heavy wall with helical wire reinforcement between 4 plies of rayon fabric. Compounded to resist engine heat, exhaust fumes, ozone, mild acids, toilet effluent salt water and abrasion. Meets or exceeds USCG, ABYC, and SAE J2006 R2 Standards for wet exhaust service.
Sizes: ½” – 16” I.D.
Temperature: -20° to 200° F Continuous
Description: Black with Blue Stripe
Tube and Cover: Black Synthetic EPDM Blend Rubber
Reinforcement: Helix Wire and Plies of Synthetic Cord
Packaging: 50 Foot Coils up to 3” I.D., 12.5 Foot Lengths, Custom Cut Lengths.
SERIES 252 Corrugated Certified Wet Exhaust Hardwall Hose – SAE J2006 R2
Certified wet exhaust, heavy wall with helical wire reinforcement between 4 plies of rayon fabric. Compounded to resist engine heat, exhaust fumes, ozone, mild acids, toilet effluent salt water and abrasion. Meets or exceeds USCG, ABYC and SAE J2006 R2 Standards for wet exhaust service. Designed for severe-bend applications.
Sizes: ½” – 8” I.D.
Temperature: -20° to 200° F Continuous
Description: Black with Blue Stripe
Tube and Cover: Black Synthetic EPDM Blend Rubber
Reinforcement: Helix Wire and Plies of Synthetic Cord
Packaging: 50 Foot Coils, 12.5 Foot lengths, Custom Cut Lengths.