Wencon® Marine Repair Products are designed to provide protection of surfaces exposed to galvanic corrosion, cavitation, wear, or breakage.
Wencon Pipe Tape is a pre-impregnated fiberglass bandage ready for use after soaking in water for 10 seconds. After 10 minutes cure the bandage hardens and the pipe can usually be reactivated. The bandage is fully cured within 1 hour.
Exhaust Repair
Wencon Exhaust Repair is a one-component steel cold weld product that can be used to repair cracks and holes in equipment exposed to temperatures up to 1300° C (2400°F)
Typical applications include engine heads, blocks and manifolds, as well as furnaces and boilers. Wencon Exhaust Repair is especially valuable in areas and situations where traditional heat welding cannot be accomplished.
Rapid Repair
Wencon Rapid is a fast-curing two-component, epoxy compound with a wide range of applications for emergency repairs and maintenance.
Typical applications are emergency repairs, where a short curing time is required to reduce downtime. Wencon Rapid is very suitable for applications where thicker layers of material are required, as the compound quickly sets and becomes solid. The compound can also be used for regular maintenance jobs and as a filling compound.
Underwater Repair Putty
Wencon UW Putty is a two-component compound, that can be applied on wet surfaces or underwater. The UW Putty is excellent for filling up holes, dents, and rebuilding surfaces which, due to high humidity, have to be done in wet conditions. Wencon UW Putty is developed for applications, where bigger quantities are needed in one process.
Typical applications are corroded hulls and all underwater parts of vessels and structures, tanks, pipes, flange faces, etc. Wencon UW Putty is also suitable for filling gaps and holes underwater or on wet surfaces, before completion with Wencon UW Cream or UW Coating.
Underwater Coating
Wencon UW (underwater) Coating is a two-component product, to be applied on wet surfaces or underwater. The UW Coating is ideal for the repair of ballast- and cooling pipes where dewpoint can be an issue. A pipe repair using Wencon UW Coating combined with interchanging layers of Wencon reinforcement tape. Excellent for repair jobs which, due to high humidity, have to be done in wet conditions.
Typical applications are coatings of steel surfaces rebuilt with Wencon UW Cream, and coatings underwater – like ships hulls, and/or other submerged structures, tanks, pipes, etc. Examples of repairs under extreme conditions could be On-site repair of sea-water filter housings, where it is not possible to achieve a dry surface and coating of scratched painting on hulls in splash-zones and underwater.
Wencon specializes in the development of epoxy products for rebuilding and surface protection of metal exposed to corrosion, galvanic corrosion, cavitation, wear or breakage in maritime and offshore applications.
Wencon offers easy to use solutions for high temperature and underwater and wet conditions. Be insured against downtime with Wencon Repair Kit on board your vessel for permanent and temporary repairs.
All Wencon’s products and repair systems hold classification society certificates and approvals from all the major societies. The entire product line is approved for repairs and protection of metal by; RINA, DNV-GL, Bureau Veritas and ABS.
With 30 years of experience and know-how, Wencon’s goal is to help you to perform your repair tasks quickly and effectively and thereby reduce downtime. Wencon focuses on recycling and maintenance in order for you to save money and time, while acting sustainably.
Wencon offers solutions for the following categories: Energy Companies, EPC, Drilling, FPSO Owners, Vessel Owners, Oil Service Companies, Shipyards and Offshore Wind.
H.S. White carries stock of Wencon products, and can assist you in finding optimal solutions for your repair needs.
This website uses cookies.